Tray Priority - Fuji Xerox DocuCentre SC2020 User Manual

9 Tools
To specify the paper loaded in Tray 2.
Values:
Display Tray
Prompt
Size
Type
9
Note

Tray Priority

Purpose:
To set the priority order of the paper trays for automatic tray selection. If paper trays loaded
with the same paper size and type exists, the paper tray is selected according to this priority
order.
198
Enter a check to display a popup message that prompts to set Type and Size when
paper is loaded in Tray 2. The factory default is on (check).
Auto Detect
Custom Size Length(x)
Width(y)
Plain (60-89 gsm)
Plain Reload
Bond (90-105 gsm)
Bond Reload
Recycled (60-105 gsm)
Recycled Reload
Punched (60-89 gsm)
Letterhead (60-89 gsm)
Heavyweight (HW) (106-169 gsm)
HW Reload
Extra Heavyweight (X-HW) (170-256 gsm)
X-HW Reload
Gloss (106-169 gsm)
Gloss Reload
Heavyweight Gloss (170-256 gsm)
HW Gloss Reload
Labels (106-256 gsm)
Pre-Printed (60-89 gsm)
Colored (60-89 gsm)
Postcard
Postcard Reload
• When using a non-standard size envelope, specify the size without the flap in [Custom Size].
210 mm Specifies the length of the
(8.3 inches) custom size paper.
182-432 mm
(7.2-17.0 inches)
297 mm Specifies the width of the
(11.7 inches)
custom size paper.
140-297 mm
(5.5-11.7 inches)