Fuji Xerox DocuCentre SC2020 User Manual page 156

9 Tools
On
Hex Dump
Purpose:
To help isolate the source of a print job problem. With [Hex Dump] selected, all data sent to
the machine is printed in hexadecimal and character representation. Control codes are not
executed.
Values:
Disable
Enable
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in
the draft mode.
Values:
Disable
Enable
Line Termination
Purpose:
To add the line termination commands.
Values:
Off
Add-LF
9
Add-CR
CR-XX
Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job that
does not specify a print mode.
Values:
Black and White
Color
Ignore Form Feed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
Off
156
Enables the Image Enhance feature.
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Prints in the black and white mode.
Prints in the color mode.
Disables the Ignore Form Feed feature.