Fuji Xerox DocuCentre SC2020 User Manual page 128

7 Scan
To Scan an Image From the Drawing Software
1
Place document in the machine.
2
Start the drawing software, such as Paint for Windows.
Note
3
Click [Paint] > [From scanner or camera] (Click [File] > [From Scanner or Camera] for
Windows XP, Windows Server 2003, Windows Server 2008 and Windows Vista).
The [Scan using FX DocuCentre SC2020 (WIA - USB)] window appears.
Note
4
Select [Document Feeder] or [Flatbed] in [Paper source].
7
Note
5
Select your scanning preferences and click [Adjust the quality of the scanned picture] to
display the [Advanced Properties] dialog box.
6
Select the desired properties including brightness and contrast, and then click [OK].
7
Click [Scan] to start scanning.
8
Click [Save] from the [Paint] menu.
9
Enter a picture name, and select a file format and destination to save the picture.
To Scan an Image From Control Panel
Note
1
Place document in the machine.
2
Click [start] > [Control Panel] > [Printers and Other Hardware] > [Scanners and Cameras].
3
Double-click the scanner icon.
The [Scanner and Camera Wizard] launches.
4
Click [Next] to display the [Choose Scanning Preferences] page.
Note
5
Select your desired type of picture, paper source, and paper size, and click [Next].
6
Enter a picture name, select a file format, and specify the desired location to save the
scanned document.
128
• When you use Windows Vista, use Windows Photo Gallery instead of Paint.
• When using applications that utilize WIA 2.0, such as [Windows Fax and Scan] on Windows Vista,
Windows 7 and Windows 8, the [Feeder (Scan both sides)] option can be selected for duplex (two-
sided) scanning.
• The illustration may vary for different operating systems.
• Select [Document Feeder] when you want to scan the document loaded in the document feeder.
Select [Flatbed] when you want to scan the document loaded on the document glass.
• This feature is supported on Windows Server 2003 and Windows XP only.
• The screen image may vary depending on the operating system.