Fuji Xerox DocuCentre SC2020 User Manual page 271

Error Code
035-702 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
035-704 recover.
035-705
035-706
035-708 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Try the following:
Retry the same operation.
Reduce the modem speed.
For more information on the modem speed, refer to "Modem Speed" (P.167).
035-709 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
035-710 recover.
035-716
035-717 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Reduce the modem speed.
For more information on the modem speed, refer to "Modem Speed" (P.167).
035-718 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the status of the remote machine.
035-720 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check the features supported by the remote machine.
035-728 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
035-729 recover.
035-730
035-737
035-739
035-740
035-742
035-746
035-779
035-781 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
recover. Check if the remote machine is busy.
035-792 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
035-793 recover.
062-956 The original size is not detected accurately. Check the originals placed on the
document glass, reload the originals, and then press the <Start> button.
Note
116-721 Select [Close], or wait for the time set in [Fault Timeout] for the machine to
116-722 recover.
118-390 A device not supported by the machine is installed. Remove the device and
restart the machine.
Remedy
• When using a non-standard size document, specify the original size in
[Original Size]. Depending on the selected document size, the printout
may be too large for the paper or may have shadows at the edges.
Error Code
13
271