Fuji Xerox DocuCentre SC2020 User Manual page 230

12 Maintenance
When replacing the waste toner container, clean the laser scanners located behind the
waste toner container by using the cleaning bar supplied with a new waste toner container
to prevent inconsistencies in density or color in copies and prints.
Important • Do not touch the five gray-colored sponge parts on the back side of the waste toner container.
1
Make sure that the machine is not operating, and
open the front cover.
2
Turn the lock lever counterclockwise.
12
3
Unlock the waste toner container, and then pull it
out making sure to hold it upright so that the
waste toner does not spill out.
Note
230
WARNING
Never use a vacuum cleaner for spilled toner and residual toner in this product,
toner cartridge or toner bottle. It may catch fire by electric sparks inside a
vacuum cleaner and cause explosion. Use a broom or a wet cloth to wipe off spill.
If you spill a large volume of toner, contact your local Fuji Xerox representative.
Never throw a waste toner bottle into an open flame. Toner may catch fire and
cause burn injuries or explosion. If you have a used waste toner bottle no longer
needed, contact your local Fuji Xerox representative for its disposal.
Otherwise, your hands may get dirty with toner.
• When you replace the waste toner container, toner may spill and soil the floor. We recommend
laying paper on the floor beforehand.
• The proper disposal of used waste toner containers is required. Return the old waste toner container
to our Customer Support Center.
• The use of waste toner containers not recommended by Fuji Xerox may degrade image quality and
performance. Use only waste toner containers recommended by Fuji Xerox.
• Take care not to drop the waste toner container
while you are removing it.