Setting A Login Name And A Password (Smb Only); Creating A Shared Folder (Smb Only) - Fuji Xerox DocuCentre SC2020 User Manual

For information on how to configure the FTP service, contact your system administrator.
Follow the procedure below to use the Scan to Server/Computer feature.
For SMB:
Step
1

Setting a Login Name and a Password (SMB Only)

2

Creating a Shared Folder (SMB Only)

3 Setting a Destination Using an Address Book
4 Sending the Scanned File on the Network
For FTP:
Step
1 Setting a Destination Using an Address Book
2 Sending the Scanned File on the Network
Setting a Login Name and a Password (SMB Only)
The Scan to Computer/Server feature requires a user login account with a valid and non-
empty password for authentication. Confirm a login user name and password.
If you do not use a password for your user login, you need to create a password on your User
Login Account. The following uses Windows 7 as an example. The procedure differs
depending on the OS.
1
Click [Start] > [Control Panel].
2
Click [User Accounts and Family Safety].
3
Click [User Accounts].
4
Click [Create a password for your account] and add in a password for your user login
account.
Creating a Shared Folder (SMB Only)
Share a folder to store the scanned document using the following procedure.
The following uses Windows 7 as an example. The procedure differs depending on the OS.
• Windows Server 2003
FTP service of Microsoft Internet Information Services 6.0
• Windows Vista, Windows Server 2008
FTP service of Microsoft Internet Information Services 7.0
• Windows 7, Windows Server 2008 R2
FTP service of Microsoft Internet Information Services 7.5
• Windows 8, Windows Server 2012
FTP service of Microsoft Internet Information Services 8.0
• Windows 8.1, Windows Server 2012 R2
FTP service of Microsoft Internet Information Services 8.5
• Mac OS X 10.3/10.4/10.5/10.6/10.7/10.8/10.9
FTP service of Mac OS X
Procedure
Procedure
Using a Scanner on the Network
See Page
P.131
P.131
P.133
P.137
See Page
P.133
P.137
7
131