Fuji Xerox DocuCentre SC2020 User Manual page 246

13 Problem Solving
13
246
Symptom
Unable to insert Did you open a cover or
or remove a tray. switch the machine off during
printing?
Unable to copy Is the document glass or the
with the specified document glass cover dirty?
size.
Is the document a
transparency or highly
translucent medium?
Is the document in the correct
position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Possible Cause
Do not forcibly insert or remove the tray.
Switch off the power. In a few seconds,
switch on the power. When the machine is
ready to receive data, insert or remove the
tray.
Clean the document glass or document glass
cover.
Refer to "Cleaning the Document Glass Cover and the
Document Glass" (P.237).
Use the document glass to copy the
document, placing a sheet of white paper on
top of it.
Place the document correctly.
Refer to "Placing Document" (P.72).
Align the document guides correctly.
Refer to "Placing Document" (P.72).
Smooth out the document and place it again
correctly.
Refer to "Placing Document" (P.72).
Remedy