Cooling Mode - Fuji Xerox DocuCentre SC2020 User Manual

3 Product Overview

Cooling Mode

The machine enters the Cooling mode if its internal temperature rises too high. During this
mode, either of the following screen is displayed on the touch screen.
This screen disappears when the internal temperature has cooled down. Wait until the
screen disappears.
If the room temperature is high, lower the room temperature because it may take longer
3
time for the machine to cool down.
Note
Important • For screen A: During the Cooling mode, the fan inside the machine is working to release heat. Do not
58
Screen A
• You can select [Close] to forcibly close the screen above. However, you cannot operate the machine
because the machine is still in the Cooling mode. Wait until the message "Machine Cooling in
Progress" disappears in the upper left corner of the screen.
open the front cover or switch off the machine during the mode.
• For screen B: During the Cooling mode, open the cover illustrated on the screen to reduce the time
for cooling.
Screen B