Paper Types; Supported Paper Weights And Sheet Counts - Fuji Xerox DocuCentre SC2020 User Manual

4 Loading Paper

Paper Types

This section describes the paper types supported by the machine.
Use of non-recommended paper types may result in paper jams, lower print quality,
malfunctions, or damage to the machine. To achieve optimum machine performance, use
only paper types recommended by Fuji Xerox.
If you desire to use paper other than the paper recommended by Fuji Xerox, contact our
Customer Support Center.
Do not use conductive paper such as origami paper, carbonic paper or
conductively-coated paper. When paper jam occurs, it may cause short-circuit and
eventually a fire accident.
Important • Moisture generated by water, rain, or vapor may cause the printed images to fade. For more

Supported Paper Weights and Sheet Counts

4
Tray 1 (Standard)
Tray 2
(One Tray Module)
(Optional)
Tray 5 (Bypass)
*1 : When using 80 gsm paper
*2 : When using Fuji Xerox standard paper
Important • Paper jams may result if you attempt to print on a different paper type or size than the type or size
Note
Supported paper sizes:
60
WARNING
information, contact our Customer Support Center.
Paper Trays Basis Weight/Ream Weight
60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg
60 to 256 gsm
Ream Weight: 51.6 - 220.1 kg
60 to 216 gsm
Ream Weight: 51.6 - 185.7 kg
selected in the print driver, or from a tray that does not support the loaded paper. Select the correct
paper size, type, and tray to ensure successful printing.
• Basis weight is the weight of one sheet of paper of 1 m
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 x 1,091 mm) paper.
Maximum: A3, 11 x 17" (Non-standard size: 297 × 432 mm)
Minimum: A5 (Non-standard size: 89 × 98 mm)
Loadable

Paper Types

*
Quantity
*1 Plain (60-89 gsm)
250 sheets
(Up to 27 mm)
*1 Plain (60-89 gsm)
500 sheets
Bond (90-105 gsm)
(Up to 54 mm)
Heavyweight (106-
169 gsm)
*2
100 sheets
Extra-HW (170-256
(Up to 10 mm)
gsm)
2
in size.