Fuji Xerox DocuCentre SC2020 User Manual page 123

Important • To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-pasted
Follow the steps below to place document on the document feeder.
You can place a single or multiple pages of a document.
1
Remove any paper clips or staples from document before placing it in the document
feeder.
2
Place the document in the center of the
document feeder, with the side to be scanned (or
the front surface of a 2 Sided document) facing
up.
3
Align the document guides to each side of the
document.
4
Open the document stopper.
Document Glass
Document sizes supporting automatic detection
The document size is detected automatically when [Original Size] is set to [Auto].
The following document sizes are detected automatically: A3
B5 , A5
Supported document sizes
You can select one of the following document sizes from [Original Size].
A3 , B4
8.5 × 11"
Note
documents, curled paper, or carbon-backed paper. If you can flatten the curled document, you can
use the document.
, 11 × 17" , 8.5 × 11" , 8K
, A4 , A4 , B5 , B5
, 8K , 16K , and 16K
• When [Original Size] is set to [Auto], an error screen appears when you place a non-standard size
document on the document glass. In this case, select a document size manually by selecting
[Original Size] from the menu items. Depending on the selected document size, the printout may be
too large for the paper or may have shadows at the edges.
, 16K , and 16K
, A5 , 11 × 17" , 8.5 × 14"
.
Scanning Procedure
, B4 , A4 , A4 , B5 ,
.
, 8.5 × 13" , 8.5 × 11" ,
7
123