Fuji Xerox DocuCentre SC2020 User Manual page 155

PC-850
PC-852
PC-1004
PC-8 TK
Font Size
Purpose:
To specify the font size for scalable typographic fonts, within the range of 4.00 to 50.00. The
default is 12.00.
Font size refers to the height of the characters in the font. One point equals approximately
1/72 of an inch.
Note • The [Font Size] menu is only displayed for typographic fonts.
Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts, within the range of 6.00 to 24.00.
The default is 10.00.
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For
nonscheduled mono spaced fonts, the pitch is displayed, but cannot be changed.
Note • The [Font Pitch] menu is only displayed for fixed or mono spaced fonts.
Form Line
Purpose:
To set the number of lines in a page.
Values:
*
64 (mm series)/
*
60 (inch series)
5-128
* : Denotes region-specific factory default values.
The machine sets the amount of space between each line (vertical line spacing) based on
the [Form Line] and [Orientation] menu items. Select the correct [Form Line] and
[Orientation] before changing [Form Line].
For more information, refer to "Orientation" (P.153).
Quantity
Purpose:
To set the default print quantity, within the range of 1 to 999. The default is 1. (Set the
number of copies required for a specific job from the print driver. Values selected from the
print driver always override values selected from the control panel.)
Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line
between black and white smoother to decrease jagged edges and enhance the visual
appearance.
Values:
Off
PS MATH
PI FONT
LEGAL
ISO-4
Sets the value in increments of 1.
Disables the Image Enhance feature.
Understanding the Machine Menus
WINBALT
SYMBOL
WINGDINGS
DNGBTSMS
9
155