Fuji Xerox DocuCentre SC2020 User Manual page 277

7
Close the document feeder top cover until it clicks into place, and confirm that there is no
space between the near or far side of the cover and the document feeder.
8
If you cannot find the document, carefully lift up the document feeder. If you find the
document, remove it, and then close the document feeder.
9
If you cannot find the document in Step 8, lift up
the document feeder tray and remove the
document.
10
Carefully move the document feeder tray back into position.
11
Make sure that the document is not torn,
wrinkled, or folded, and then reload the
documents to complete the job.
After removing the jammed document:
Copy:
Place the unscanned document again including
the jammed pages.
Scan (E-mail/PC(Network)):
Place the entire document again.
If the scanned data is already sent, place the unscanned document again including the
jammed pages.
Scan (TWAIN/WIA(Windows Imaging Acquisition)):
Place the unscanned document again including the jammed pages.
Fax:
Place the entire document again.
Note • Torn, wrinkled or folded document pages can cause document jams, or damage. Always copy torn,
wrinkled, or folded documents by placing them directly on the document glass.
Document Jams
13
277