Configuration Of Store To Wsd; Step 1 Preparations; Step 2 Enabling Port; Wsd Stands For Web Services On Devices - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Configuration of Store to WSD

This section describes how to configure the machine to use the Store to WSD service.
Note
The following shows the reference section for each procedure.

Step 1 Preparations .....................................................................................................................................................................367

Step 2 Enabling Port....................................................................................................................................................................367

Step 3 Confirmation on the Computer ...................................................................................................................................368
Step 1 Preparations
The following environment is required to use the Store to WSD feature on the machine.
 The following operation system must be installed on a destination computer.
- Microsoft Windows 8
- Microsoft Windows 8.1
- Microsoft Windows 7
- Microsoft Windows Vista Service Pack 2
- Microsoft Windows Server 2012
- Microsoft Windows Server 2012 R2
Note
Step 2 Enabling Port
To use the Store to WSD service, enable the WSD scan port. The following describes the
configuration procedures on the machine.
Note
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter]. When a passcode is required, select [Next]
and enter the system administrator's passcode, and select [Enter].
Note
3) Select [Tools] on the Services Home screen.
2
Enable the port.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [WSD], and then select [Change Settings].
4) Select [WSD Scan - Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Select [Close].

• WSD stands for Web Services on Devices.

• WSD stands for Web Services on Devices.
• You can configure the settings using CentreWare Internet Services. For information on how to use
CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet
Services" (P.325).
• WSD stands for Web Services on Devices.
• The default user ID is "11111".
• The default passcode is "x-admin".

Configuration of Store to WSD

367
9