Inspection
For front seat belt retractor with seat belt tensioner,
review the SRS component locations, '99-01 models
(see page 23-18), '02 model (see page 23-19), '03-04
models (see page 23-20), and the precautions and
procedures (see page 23-21) before performing repairs
or service.
Retractor
1. Before installing the retractor, check that the seat
belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the
retractor (A) is leaned slowly up to 15° from the
mounted position. The seat belt should lock when
the retractor is leaned over 40°. Do not attempt to
disassemble the retractor.
Front
6°
40°
40°
15°
15°
Forward
Second row
3°
40°
40°
15°
15°
Forward
40°
40°
15°
15°
A
Inside
40°
40°
15°
15°
A
Inside
Third row
9°
40°
40°
15°
15°
Forward
Third row center shoulder
40°
40°
15°
15°
40°
15°
15°
40°
A
Inside
3. Replace the seat belt with a new assembly if there
is any abnormality. Do not disassemble any part of
the seat belt for any reason.
40°
40°
15°
15°
A
Inside
Forward
(cont'd)
23-15