Honda 2004 Odyssey Service Manual page 2072

Manual height adjustable seat ('01-02 models)
A
B
Manual height adjustable seat ('03-04 models)
A
B
C
Manual seat
'03-04 models passenger's seat is similar
to the illustration shown.
A
B
3. Remove the center anchor bolt (D), and remove the
seat belt buckle (E).
E
D
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
E
D
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
E
D
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
4. For '99-04 models driver's seat and '03-04 models
passenger's seat, remove the seat belt switch
harness (A):
• Power seat: Adjust the seat cushion to its
maximum height, and remove the harness.
• Manual seat: Remove the seat cushion mounting
bolts (B) from the inner seat track (C), then lift the
seat cushion halfway from the inner seat track,
and remove the harness. Take care not to
damage the hinge bracket (D).
• '03-04 models passenger's seat is similar to the
illustration shown.
D
B
10 x 1.25 mm
47 N·m (4.8 kgf·m, 35 lbf·ft)
5. Install the buckle in the reverse order of removal,
and note these items:
• Apply liquid thread lock to the anchor bolt before
reinstallation.
• Assemble the washers on the center anchor bolt
as shown.
• Move the seat up and down to make sure the
buckle harness is not pinched.
Center anchor bolt installation
CENTER ANCHOR
BOLT
WAVE
CENTER
WASHER
ANCHOR
BUSHING
A
C
WASHERS
TOOTHED LOCK
WASHER
SPRING
WASHER
23-7