Honda 2004 Odyssey Service Manual page 2046

Hide thumbs Also See for 2004 Odyssey:
Table of Contents

Advertisement

Picture is missing a color or tone
1. Perform the start-up procedure (see page 22-376).
Press the Monitor Check button then press the RGB
color button (see page 22-378).
Are the red, green, and blue colored circles
shown?
YES
Push the return button. Push the Color
Change button, and then press the Default button
to restore the standard color settings.
NO
Go to step 2.
2. Turn the ignition switch OFF. Disconnect the
navigation unit connector A (12P) from the
navigation unit, and the display unit connector B
(20P) from the display unit.
3. Check for loose termnals at the navigation unit
connector A (12P) and the display unit connector B
(20P).
Are there loose terminals?
YES
Repair the terminal.
NO
Go to step 4.
4. Check for continuity between the appropriate
terminals of the navigation unit connector A (12P)
to the display unit connector B (20P) based on the
missing color(s).
Missing
Navigation unit
color
connector A
(12P)
Blue
A10
Green
A5
Red
A4
NAVIGATION UNIT CONNECTOR A (12P)
Wire side of female terminals
DISPLAY UNIT CONNECTOR B (20P)
Wire side of female terminals
Display unit
Wire
connector B
color
(20P)
B18
YEL
B9
RED
B8
WHT
Is there continuity?
YES
Go to step 5.
NO
There is an open in the circuit between the
display unit and the navigation unit. Replace the
affected shielded harness.
5. Check for continuity between the appropriate
terminals of the navigation unit connector A (12P)
and display unit connector B (20P) based on the
missing color(s).
Missing color
Navigation unit
connector A
(12P) Display
unit connector B
(20P)
Blue
Green
Red
NAVIGATION UNIT CONNECTOR A (12P)
Wire side of female terminals
DISPLAY UNIT CONNECTOR B (20P)
Wire side of female terminals
Is there continuity?
YES
There is a short to body ground in the circuit
between the display unit and the navigation unit.
Replace the affected shielded harness.
NO
Replace the navigation unit. If the problem is
still unresolved, replace the display unit.
Display unit
connector B
(20P) Wire color
B10
B10, B20
A5
B10, B20
A4
B10, B20
22-367

Advertisement

Table of Contents
loading

Table of Contents