Honda 2004 Odyssey Service Manual page 2063

Navigation System
Vehicle Speed Pulse (VSP) Sensor
Replacement
1. Disconnect the 3P connector (A) from the vehicle
speed pulse (VSP) sensor (B).
C
D
2. Remove the mounting bolt (C), then remove the
VSP.
3. Install the VSP. Lubricate the new O-ring (D) and
the vehicle speed pulse (VSP) sensor joint (E) with
grease before installing.
22-384 22-384
Navigation Unit Removal/
Installation
1. Remove the navigation unit guard (A) from the
A
B
E
2. Remove the navigation unit bracket (B) from the
3. Remove the navigation unit (C) from the bracket.
4. Install the parts in the reverse order of removal.
bracket.
A D
passenger's seat.
NOTE: Install the navigation unit guard with the
arrow (D) pointing up.
B
C