Show Ip Pim Bsr-Router; Show Ip Pim Rp-Hash - NETGEAR ProSafe GSM7224P User Manual

show ip pim bsr-router

This command displays the bootstrap router (BSR) information. The output includes elected
BSR information and information about the locally configured candidate rendezvous point
(RP) advertisement.
Format
show ip pim bsr-router [candidate | elected]
Mode
• Privileged EXEC
• User EXEC
Term Definition
BSR Address
IP address of the BSR.
BSR Priority
For candidate it is the configured priority and for elected BSR it is the learned priority..
BSR Hash Mask
Configured or learned hash mask length of the BSR.
Length
Next Bootstrap
Time (in hours, minutes, and seconds) in which to send the next bootstrap message
message
from this BSR.
Next Candidate RP
Time (in hours, minutes, and seconds) in which the next CRP advertisement will be
Advertisement in
sent. This field is applicable only for the elected RP.
(Switch) #show ip pim bsr-router candidate
BSR Address 192.168.10.1
BSR Priority 0
BSR Hash Mask Length 32
Next Bootstrap message (hh:mm:ss) NA
Next Candidate RP Advertisement (hh:mm:ss)NA
(Switch) #show ip pim bsr-router elected
BSR Address 192.168.10.1
BSR Priority 0
BSR Hash Mask Length 32
Next Bootstrap message (hh:mm:ss) 00:00:05
Next Candidate RP Advertisement (hh:mm:ss)00:00:02

show ip pim rp-hash

This command displays the rendezvous point selected for the specified group address..
Format
show ip pim rp-hash <group-address>
Modes
Privileged EXEC
Term Definition
RP Address
Address of the RP for the group specified.
Type
Origin from where this group mapping is learned.
(Switch) # show ip pim rp-hash 224.1.2.0
RP Address 192.168.10.1
Type Static
ProSafe Managed Switch
IP Multicast Commands
338