Power Supply Cooling Fan (Fm10; Cooling Fan Motor (Fm11; Tray1 Paper Feed Clutch (Cl1) / Manual Tray Paper Feed Clutch (Cl2 - Konica Minolta BIZHUB C3100P Service Manual

9. To reinstall, reverse the order of removal.

5.21 Power supply cooling fan (FM10)

1. Remove the exit cover.
G.5.4 Exit cover
2. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
3. Remove the operation panel.
G.5.6 Operation panel
4. Remove the left cover.
G.5.2 Left cover
5. Remove the rear cover.
G.5.1 Rear cover
6. Remove the upper cover1/ upper cover2.
G.5.7 Upper cover1/ Upper cover2
[1] [3]
[2] [1]
10. To reinstall, reverse the order of removal.

5.22 Cooling fan motor (FM11)

1. Remove the exit cover.
G.5.4 Exit cover
2. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
3. Remove the operation panel.
G.5.6 Operation panel
4. Remove the left cover.
G.5.2 Left cover
5. Remove the rear cover.
G.5.1 Rear cover
6. Remove the upper cover1/ upper cover2.
G.5.7 Upper cover1/ Upper cover2
[3]
[2] [1] [4]
10. To reinstall, reverse the order of removal.

5.23 Tray1 paper feed clutch (CL1) / Manual tray paper feed clutch (CL2)

1. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
2. Remove the left cover.
G.5.2 Left cover
3. Remove the rear cover.
G.5.1 Rear cover
4. Remove the rear right cover.
G.5.3 Rear right cover
5. Remove the printer control board.
G.5.11 Printer control board (PRCB)
6. Remove the high voltage unit.
G.5.13 High voltage unit (HV1)
7. Remove the transport motor.
G.5.19 Transport motor (M2)
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
7. Remove the harness from three harness guides [1].
8. Disconnect the connector [2].
9. Remove the power supply cooling fan [3].
7. Remove the harness from the harness guide [1].
8. Disconnect the connector [2].
9. Remove two screws [3], and remove the cooling fan motor [4].
G-21
procedure (b...