Buzzer Volume; Initial Mode; Toner Empty Stop; Toner Near Empty - Konica Minolta magicolor 2590MF Service Manual

Field Service Ver. 1.0 Aug. 2007
8.2.6

BUZZER VOLUME

Function
• To set the volume of alarms and the beep sounded when a key is pressed.
Use
• The default setting is LOW.
Setting/
procedure
HIGH
8.2.7

INITIAL MODE

Function
• To set the mode (Copy mode or Fax mode) that the machine starts up in or returns to
after the Control Panel is reset.
Use
• The default setting is COPY.
Setting/
procedure
"COPY"
8.2.8

TONER EMPTY STOP

Function • Specifies whether to stop or continue printing when a toner empty condition is detected.
Use • To permit printing upon a toner empty condition.
• The default setting is ON.
"ON"
Setting/
procedure
ON: If [ON] is selected, printing, copying and faxing stop when the toner runs out.
ON (FAX): If [ON (FAX)] is selected, only faxing stops when the toner runs out.
OFF: If [OFF] is selected, printing, copying and faxing do not stop when the toner runs out.
8.2.9

TONER NEAR EMPTY

Function • To set whether to display a message when a toner near empty state is detected.
Use • Use this setting to display a message when a toner near empty state is detected.
• The default setting is OFF.
Setting/
procedure
ON
8.2.10

AUTO CONTINUE

• Enables or disables printing when the size of the media loaded in the tray does not
Function
match that of the print data.
• To print data on the media loaded in the tray if the media loaded in the tray does not
Use
match that of the print data.
• The default setting is OFF.
Setting/
procedure
ON
"LOW" OFF
FAX
ON (FAX) OFF
"OFF"
"OFF"
8. Menu mode
87