Serial Flash Vendors; Boot-Up Strapping Options (Flash) - Intel EP80579 Manual

Intel
Table 74.

Boot-up Strapping Options (Flash)

16.2.3

Serial Flash Vendors

The following vendors manufacture serial flash devices that conform to Intel's specific
requirements. For additional details on the compatibility requirements for SPI devices
see the Intel
vendor directly for information on packaging and density.
ATMEL: http://www.atmel.com/
INTEL: http://www.intel.com/design/flcomp/prodbref/s33.htm
MACRONIX:
PMC: http://www.pmcflash.com/
SST: http://www.ssti.com/
STM: http://us.st.com/stonline/
WINBOND:
Note: OEMs must fully validate any SPI flash device to ensure compatibility with their
platforms. This list should not be considered as a complete list of SPI vendors and is
not an indication of Intel approved devices or vendors. Contact your preferred flash
vendor directly to determine if they have a compatible device.
®
Intel EP80579 Integrated Processor Product Line
Platform Design Guide
201
®
EP80579 Integrated Processor Product Line—Synchronous Peripheral Interface (SPI)
GPIO[17] GPIO[33]
0 0
0 1
1 0
1 1
®
EP80579 Integrated Processor Product Line Datasheet. Contact the flash
http://www.macronix.com/
http://us.winbond-usa.com/
BIOS Bootup Option
Boot BIOS from SPI Flash
Reserved
Reserved
Boot BIOS from LPC FWH
(default)
May 2010
Order Number: 320068-005US