Show Capability Feature Monitor - Cisco Catalyst 3650 series Command Reference Manual

show capability feature monitor

show capability feature monitor
To display information about monitor features, use the show capability feature monitor command in privileged
EXEC mode.
show capability feature monitor {erspan-destination | erspan-source}
Syntax Description
erspan-destination
erspan-source
Command Modes
Privileged EXEC (#)
Command History
Release
Cisco IOS XE Denali 16.3.1
Examples The following is sample output from the show capability feature monitor erspan-source command:
Switch# show capability feature monitor erspan-source
ERSPAN Source Session Supported: true
No of Rx ERSPAN source session: 8
No of Tx ERSPAN source session: 8
ERSPAN Header Type supported: II
ACL filter Supported: true
Fragmentation Supported: true
Truncation Supported: false
Sequence number Supported: false
QOS Supported: true
The following is sample output from the show capability feature monitor erspan-destination command:
Switch# show capability feature monitor erspan-destination
ERSPAN Destination Session Supported: false
Related Commands
Command
monitor session type erspan-source
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
520
Displays information about the configured Encapsulated Remote Switched
Port Analyzer (ERSPAN) source sessions.
Displays all the configured global built-in templates.
Modification
This command was introduced.
Description
Creates an ERSPAN source session number or enters
the ERSPAN session configuration mode for the
session.