Show Parser Macro - Cisco Catalyst 3550 Command Reference Manual

show parser macro

show parser macro
Use the show parser macro user EXEC command to display the parameters for all configured macros
or for one macro on the switch.
Syntax Description brief
description [interface
interface-id]
name macro-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(19)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show parser macro command:
Switch#show parser macro
Total number of macros = 2
--------------------------------------------------------------
Macro name : standard-switch10
Macro type : customizable
macro description standard-switch10
# Trust QoS settings on VOIP packets
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
--------------------------------------------------------------
Macro name : testm
Macro type : customizable
macro description this is test macro
speed 100
--------------------------------------------------------------
Catalyst 3550 Multilayer Switch Command Reference
2-344
show parser macro [{brief | description [interface interface-id] | name macro-name}] [ | {begin
| exclude | include} expression]
(Optional) Display the name of each macro.
(Optional) Display all macro descriptions or the description of a specific
interface.
(Optional) Display information about a single macro identified by the macro
name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
The command was first introduced.
Chapter 2 Cisco IOS Commands
78-11195-09