Clearing A Paper Misfeed In Finisher Fs-517/Fs-518 - Konica Minolta bizhub c650 User Manual

Troubleshooting
5
Open the upper door.
6
Lift up paper take-up roller, and then remove any paper
remaining in the tray.
7
Load the paper into the tray again, lower the paper take-up roller, and then close the tray.
Reminder
When removing misfed paper, remove it without lifting the paper take-up roller.
Be careful not to touch the surface of the paper take-up roller with your hand.

Clearing a paper misfeed in Finisher FS-517/FS-518

This procedure describes the operations to be performed along the paper path where paper misfeeds may
occur.
Depending on the selected Finishing settings, the paper path changes, resulting in different locations in the
finisher where paper misfeeds may occur.
The method for clearing paper misfeeds in Finisher FS-517 is the same as that for FS-518. Here, the method
for FS-517 is described as an example.
C650
4
4-35