Setting Originals Of Different Sizes (Mixed Original) - Konica Minolta BIZHUB 226 User Manual

3
3.6.5

Setting originals of different sizes (Mixed Original)

Mixed Original is a function to set originals of different sizes (1 shown in the illustration below) into the ADF
and make copies (2 shown in the figure below) at a time.
1. Originals
2. Copies
Tips
- The Mixed Original function is only available for originals of the same width. The following shows com-
binations of originals.
– 11 e 17w (A3w) and 8-1/2 e 11v (A4v)
– 8-1/2 e 11w (A4w) and 5-1/2 e 8-1/2v (A5v)
– 8-1/2 e 14w (B4w) and 5-1/2 e 8-1/2v (B5v)
1
Open Lateral Guide.
2
Load the original with the side you want to copy facing up.
% Do not load more than 70 sheets into the ADF at a time,
and do not load the sheets up to the point where the
top of the stack is higher than the , mark. Doing so will
likely cause jamming or spoiling of the original, or ma-
chine failure.
3
Adjust the Lateral Guide to the original size.
% If the original is not loaded correctly, it may not be fed
in straight.
4
Press Mixed Original.
Mixed Original lights up.
5
Press Paper.
3-16
Auto Paper
Loading the original
bizhub 226
3.6