How To Access The Key Operator Mode - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

How to Access the Key Operator Mode

Key Operator Password Entry screen
Procedure
1. First, be sure the copier power switch is OFF.
2. Then, turn power back ON while pressing the HELP button.
The Key Operator Password Entry screen displays when the 4-digit key operator
password is set by service.
Otherwise, the Key Operator Mode screen displays without the password
requirement.
3. If the Key Operator Password Entry screen is displayed, use the keypad on the
touch screen to enter your 4-digit key operator password; then touch " OK ", to display
the Key Operator Mode screen.
Advice
If an invalid Key operator password is entered, continue by entering the valid 4-digit
password.
If the key operator password is not valid, check with your Service Centre.
4. To display menus
arrow key. To return the menu 1. to 10. of the Key Operator Mode screen, touch the
Upper arrow key.
5. Make setting changes from the Key Operator Mode screen, as described on the
following pages.
11. to 15. of the Key Operator Mode screen, touch the
1. Key Operator Function (continued)
Key Operator Mode screen 1
Key Operator Mode screen 2
Lower
Key Operator
Mode
11 - 3