Programming Different Settings For An Output Job (Program Job) - Konica Minolta BIZHUB PRO 1050E Operator's Manual

Applications
8.10 Programming Different Settings for an Output Job
(Program Job)
In the ordinary Memory Scan mode, the combined features selected for the
job are applied to all originals to be scanned. In the Program Job mode, you
may scan multiple sets of originals and apply different settings on each set
(referred to as JOB), then output them all as a complete set.
Specifications for Program Job:
- Max. 100 JOBs can be programmed for an output job.
- Once specified, paper size and the paper type/size setting cannot be
changed for another JOB.
- Output mode and print quantity setting cannot be specified for each JOB.
The last setting made will be applied to all JOBs.
- Program Job settings cannot be stored in Job Memory.
Original A
1
Touch [Application] on the Copy Screen.
Reminder
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
bizhub PRO 1050/1050e
Original B Original C
8
Copied set
8-39