Replacing The Mx2020 Cable Managers; Figure 141: Installing An Ac Power Supply Module - Juniper MX2020 Hardware Manual

Related
Documentation

Replacing the MX2020 Cable Managers

Copyright © 2013, Juniper Networks, Inc.

Figure 141: Installing an AC Power Supply Module

Preventing Electrostatic Discharge Damage to an MX2020 Router on page 320
MX2020 AC Power Supply Module Description on page 46
MX2020 AC Power Subsystem Electrical Specifications on page 369
The MX2020 router consist of an upper, middle card-cage, lower, and dc cable
management system used for routing and securing cables away from system components.
NOTE: The middle card-cage cable manager is permanently installed onto
the MX2020 system chassis, and cannot be removed.
Removing the MX2020 Upper Cable Manager on page 306
1.
Installing the MX2020 Upper Cable Manager on page 306
2.
Removing the MX2020 Lower Cable Manager on page 307
3.
4. Installing the MX2020 Lower Cable Manager on page 308
Chapter 13: Replacing MX2020 Router Hardware Components
305