Tools Required To Install The Mx2020 Router Using A Pallet Jack; With A Pallet Jack; Removing Components From The Mx2020 Router Chassis Before Installing It With A Pallet Jack; Installing The Mx2020 Router Using A Pallet Jack With Attachment - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide

Tools Required to Install the MX2020 Router Using a Pallet Jack

Related
Documentation
Removing Components from the MX2020 Router Chassis Before Installing It with a
Pallet Jack
86
To install the router, you need the following tools and equipment:
Standard pallet jack— 48 in. (121.92 cm) deep x 27 in. (68.58 cm) wide.
Pallet jack attachment—MX2000-PT-ATTACHMENT-S
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1 and 2
2.5 mm flat-blade (–) screwdriver
7/16-in. (11 mm) torque-controlled driver or socket wrench
5/8-in. (15.8 mm) torque-controlled driver or socket wrench
9/16-in. or 14-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
ESD wrist strap
Antistatic mat
MX2020 Site Preparation Checklist on page 67
Removing Components from the MX2020 Router Chassis Before Installing It with a
Pallet Jack on page 86
Installing the MX2020 Router Using a Pallet Jack with Attachment on page 96
Reinstalling Components in the MX2020 Chassis After Installing It with a Pallet Jack
on page 99
Before installing the router with a pallet jack, you must first remove shipping covers and
components from the chassis. With components removed, the chassis weighs
approximately 330 lb (149.68 kg).
CAUTION: The shipping covers help guide the chassis into the rack. Applying
force to any other part of the chassis can cause damage.
Removing the Power Distribution Modules Before Installing an MX2020 Router with
1.
a Pallet Jack on page 87
Removing the Power Supply Modules Before Installing an MX2020 Router with a
2.
Pallet Jack on page 88
Copyright © 2013, Juniper Networks, Inc.