Holding An Mx2020 Mpc; Figure 85: Mpc Edges - Juniper MX2020 Hardware Manual
3d universal edge router
Hide thumbs
Also See for MX2020:
- Hardware manual (630 pages) ,
- Hardware manual (800 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Related
Documentation
Holding an MX2020 MPC
Copyright © 2013, Juniper Networks, Inc.
Figure 85: MPC Edges
MX2020 Modular Port Concentrator Description on page 21
MX2020 Component LEDs on the Craft Interface on page 36
Holding an MX2020 MPC on page 177
Troubleshooting the MX2020 MPCs on page 198
Replacing an MX2020 MPC on page 242
When carrying an MPC, you can hold it either vertically or horizontally.
NOTE:
A typical MPC can weigh 25 lb (11.34 kg) or more. Be prepared to
accept the full weight of the MPC as you lift it.
To hold an MPC vertically:
Orient the MPC so that the faceplate faces you. To verify orientation, confirm that the
1.
text on the MPC is right-side up and the electromagnetic interference (EMI) strip is
on the right-hand side.
Place one hand around the MPC faceplate about a quarter of the way down from the
2.
top edge. To avoid deforming the EMI shielding strip, do not press hard on it.
Place your other hand at the bottom edge of the MPC.
3.
Chapter 11: Maintaining MX2020 Router Hardware Components
177
Advertisement
Chapters
Table of Contents
Troubleshooting
