Installing The Mx2020 Lower Cable Manager; Figure 144: Removing The Lower Cable Manager - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide

Installing the MX2020 Lower Cable Manager

308

Figure 144: Removing the Lower Cable Manager

To install the lower cable manager (see
Position the lower cable manager on the studs on the lower front of the chassis, just
1.
below the MPCs.
Insert the screws into the corners in the lower cable manager onto the studs on the
2.
chassis.
Using a Phillips (+) screwdriver (number 1 or 2), tighten the mounting screws securely.
3.
Replace the cable manager cover, and secure it with the two captive screws.
4.
Figure 145 on page 309):
Copyright © 2013, Juniper Networks, Inc.