Figure 35: Upper And Lower Cable Management - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Chapter 2: MX2020 Hardware Components

Figure 35: Upper and Lower Cable Management

Upper card cage

Lower card cage

The middle card-cage cable manager, (see

Figure 36 on page 62

Figure 37 on page

is a combination cable tray and air filter located in the middle card cage, which has rows

for routing and securing the cables away from the front of the CB-REs, and SFBs.

You can use cable strips or other ties to gently secure the cables in the middle cable

manager. To secure the cables in place, loop the tie through the cable anchor and secure

the tie. To access the air filter, the cable manager needs to be opened.

Table of Contents