Maintaining And Replacing Fiber-Optic Cable; Disconnecting A Fiber-Optic Cable From An Acx5000 Router - Juniper ACX5048 Manual

CHAPTER 18
Maintaining and Replacing Fiber-Optic
Cable

Disconnecting a Fiber-Optic Cable from an ACX5000 Router

Copyright © 2015, Juniper Networks, Inc.
Disconnecting a Fiber-Optic Cable from an ACX5000 Router on page 145
Connecting a Fiber-Optic Cable to an ACX5000 Router on page 146
Maintaining Fiber-Optic Cables in an ACX5000 Router on page 147
The ACX routers has field-replaceable unit (FRU) optical transceivers to which you can
connect fiber-optic cables.
Before you disconnect a fiber-optic cable from an optical transceiver installed in an ACX
router, ensure that you have taken the necessary precautions for safe handling of lasers
(see "Laser and LED Safety Guidelines and Warnings for the ACX Router" on page
Ensure that you have the following parts and tools available:
Rubber safety cap to cover the transceiver
Rubber safety cap to cover the fiber-optic cable connector
To disconnect a fiber-optic cable from an optical transceiver installed in an ACX5000
router:
(Recommended) Disable the port in which the transceiver is installed by including
1.
the disable statement at the
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cables
connected to transceivers emit laser light that can damage your eyes.
WARNING: Do not stare into the laser beam or view it directly with optical
instruments even if the interface has been disabled.
Carefully unplug the fiber-optic cable connector from the transceiver.
2.
[edit interfaces] hierarchy level for the specific interface.
178).
145