Mx2020 Router Description - Juniper MX2020 Hardware Manual

Table 3: MX2020 Hardware and CLI Terminology Mapping (continued)
Hardware Item
(as dipslayed in Description (as
the CLI) displayed in the CLI)
ADC (n) ADC
SFB (n)
SFB
Routing Engine (n)
RE-S-1800x4
Control Board (n)
CB
Midplane
Lower Power Midplane
Midplane 1
Upper Backplane
PMP 1
Upper Power Midplane
PMP 0
Lower Power Midplane
Power system including the power distribution modules (PDMs) and power supply modules (PSMs)
PDM (n) AC Delta Power
Distribution Module
AC Y Power Distribution
Module
DC Power Distribution
Module
PSM (n)
AC 52V Power Supply
Module
DC 52V Power Supply
Module
Copyright © 2013, Juniper Networks, Inc.
Value (as
displayed in the
CLI) Item in Documentation
(n) is a value in the Adapter card
range of 0-19
(n) is a value in the Switch Fabric Board (SFB)
range of 0-7
(n) is the value in the RE-MX2000-1800x4
range of 0-1.
(n) is the value in the Control Board and Routing
range of 0-1. Engine (CB-RE)
– Router backplane
(n) is the value in the Three-phase delta ac
range of 0-3. power distribution module
(n) is the value in the Three-phase wye ac power
range of 0-3. distribution module
(n) is the value in the DC power distribution
range of 0-3. module (PDM)
(n) is the value in the AC or DC power supply
range of 0-17. modules
Chapter 1: MX2020 Router Description
Additional
Information
"MX2020 Adapter Card
(ADC) Description" on
page 20
"MX2020 Switch Fabric
Board Description" on
page 31
"RE-MX2000-1800x4
CB-RE Description" on
page 27
"MX2020 CB-RE
Description" on page 28
"MX2020 Backplane
Description" on page 19
"MX2020 Power
Subsystem
Description" on page 39
"MX2020 Three-Phase
Delta AC Power
Distribution Module
Description" on page 42
"MX2020 Three-Phase
Wye AC Power
Distribution Module
Description" on page 44
"MX2020 DC Power
Distribution Module
Description" on page 49
"MX2020 Power
Subsystem
Description" on page 39
5