Figure 80: Selecting Dc Power Subsystem Feed Redundancy; Figure 81: Mx2020 Router With Dc Power Supply Modules Installed - Juniper MX2020 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX2020:

Table of Contents

Figure 80: Selecting DC Power Subsystem Feed Redundancy

PWR OK FAULT

Using both hands, grasp the handle and slide the PSM straight into the chassis until

the PSM is fully seated in the chassis slot. Tighten the two captive screws, (see

Verify that the

82 on page 136

Chapter 9: Grounding and Providing Power to the MX2020 Router

LEDs on the PSM are lit green steadily, (see

Table of Contents