Verifying The Mx2020 Parts Received; Table 27: Parts List For A Fully Configured Mx2020 Router - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide
Related
Documentation

Verifying the MX2020 Parts Received

78
Remove the front door of the shipping crate and set it aside.
4.
Slide the remainder of the shipping crate off the pallet.
5.
Remove the foam covering the top of the router.
6.
Remove the EMI covers, large rack tray, pallet jack attachment, accessory box and
7.
the Quick Start installation instructions.
Verify the parts received against the lists.
8.
Remove the vapor corrosion inhibitor (VCI) packs attached to the pallet, being careful
9.
not to break the VCI packs open.
To remove the brackets holding the chassis on the pallet, use a 9/16-in (14 mm) socket
10.
wrench, and use a number 2 Phillips screwdriver to remove the bolts and screws from
the brackets.
Use the brackets to secure to the pallet jack attachment to prevent tilting.
11.
Save the shipping crate cover, pallet, and packing materials in case you need to move
12.
or ship the router at a later time.
Tools and Parts Required to Unpack the MX2020 Router on page 75
Verifying the MX2020 Parts Received on page 78
Installing the MX2020 Router Using a Pallet Jack with Attachment on page 96
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 27 on page 78, and an accessory box, which contains the parts listed in
on page 79. The parts shipped with your router can vary depending on the configuration
you ordered.

Table 27: Parts List for a Fully Configured MX2020 Router

Component
Chassis, including backplane, and craft interface.
EMI covers
Large mounting shelf
MPCs
ADCs
Table 28
Quantity
1
2
1
Up to 20
Up to 20
Copyright © 2013, Juniper Networks, Inc.