Mx2020 Router Hardware And Cli Terminology Mapping; Chassis; Table 3: Mx2020 Hardware And Cli Terminology Mapping - Juniper MX2020 Hardware Manual

MX2020 3D Universal Edge Router Hardware Guide

MX2020 Router Hardware and CLI Terminology Mapping

Table 3: MX2020 Hardware and CLI Terminology Mapping

Hardware Item
(as dipslayed in Description (as
the CLI) displayed in the CLI)

Chassis

MX2020
FPC (n) Abbreviated name of the
Modular Port
Concentrator (MPC)
MIC (n) Abbreviated name of the
Modular Interface Card
(MIC)
PIC (n) Abbreviated name of the
Physical Interface Card
(PIC)
Xcvr (n) Abbreviated name of the
transceiver
Fan trays (n)
172mm FanTray - 6 Fans
FPM Board
Front Panel Display
4
The Table 3 on page 4 describes the hardware terms used in MX2020 router
documentation and the corresponding terms used in the Junos OS command line interface
(CLI).
Value (as
displayed in the
CLI)
–
(n) is a value in the
range of 0-19
(n) is a value in the
range of 0-40
(n) is a value in the
range of 0-3
(n) is a value
equivalent to the
number of the port in
which the transceiver
is installed.
(n) is a value in the
range of 0-3
–
Item in Documentation
Router chassis
Modular Port Concentrator
(MPC)
Modular Interface Card
(MIC)
Built-in network ports on
the front panel of the MIC.
Optical transceivers (SFP
and XFP)
Fan trays
Craft Interface
Copyright © 2013, Juniper Networks, Inc.
Additional
Information
"MX2020 Chassis
Description" on page 12
"MX2020 Modular Port
Concentrator
Description" on page 21
MX Series 3D
Universal Edge
Routers Line Card
Guide
"MX2020 Modular
Interface Card
Description" on page 24
MX Series 3D
Universal Edge
Routers Line Card
Guide
MX Series 3D
Universal Edge
Routers Line Card
Guide
"Installing an SFP or
XFP Transceiver into an
MX2020 MPC or MIC"
on page 263
"MX2020 Cooling
System Description" on
page 54
"MX2020 Craft
Interface Description"
on page 33