Jack - Juniper MX2020 Hardware Manual

Reinstalling Components in the MX2020 Chassis After Installing It with a Pallet Jack
Copyright © 2013, Juniper Networks, Inc.
After the router is installed in the rack, remove the shipping covers, and reinstall the
removed components before booting and configuring the router. You reinstall components
first in the rear of the chassis, and then in the front:
Reinstalling the Power Distribution Modules After Installing the MX2020 Router with
1.
a Pallet Jack on page 100
Reinstalling the Power Supply Modules After Installing the MX2020 Router with a
2.
Pallet Jack on page 101
Reinstalling the Fan Trays After Installing the MX2020 Router with a Pallet
3.
Jack on page 103
Reinstalling the SFBs After Installing the MX2020 Router with a Pallet Jack on page 104
4.
Reinstalling the Adapter Card After Installing the MX2020 Router with a Pallet
5.
Jack on page 105
Reinstalling the MPCs After Installing the MX2020 Router with a Pallet Jack on page 106
6.
Reinstalling the CB-REs After Installing the MX2020 Router with a Pallet
7.
Jack on page 107
Chapter 7: Installing the MX2020 Router Using a Pallet Jack
99