CHAPTER 5
Unpacking the MX2020 Router
Overview of Unpacking the MX2020 Router
Tools and Parts Required to Unpack the MX2020 Router
Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
Overview of Unpacking the MX2020 Router on page 75
Tools and Parts Required to Unpack the MX2020 Router on page 75
Unpacking the MX2020 Router on page 76
Verifying the MX2020 Parts Received on page 78
To unpack the router:
Gather the tools required to unpack the router.
1.
See
"Tools and Parts Required to Unpack the MX2020 Router" on page 75
Unpack the router.
2.
See
"Unpacking the MX2020 Router" on page 76
Verify that all parts have been received.
3.
See
"Verifying the MX2020 Parts Received" on page 78
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Unpacking the MX2020 Router on page 76
Verifying the MX2020 Parts Received on page 78
MX2020 Router Overview on page 3
75