Ip/Mac Binding Exempt List - ZyXEL Communications ZyWall USG 2000 User Manual

screen. Use this screen to configure an interface's IP to MAC address binding
settings.
Figure 309 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
Table 106 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
Interface
Name
IP Address
MAC Address
Description
OK
Cancel

22.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the
IP/MAC Binding Exempt List screen. Use this screen to configure ranges of IP
addresses to which the ZyWALL does not apply IP/MAC binding.
Figure 310 Configuration > Network > IP/MAC Binding > Exempt List
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field displays the name of the interface within the ZyWALL and the
interface's IP address and subnet mask.
Enter the IP address that the ZyWALL is to assign to a device with the
entry's MAC address.
Enter the MAC address of the device to which the ZyWALL assigns the
entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
Chapter 22 IP/MAC Binding
419