Chapter 7 Tutorials
Click Configuration > Firewall > Add.
1
In the From field select WAN.
In the To field select LAN.
Configure a name for the rule (WAN-to-LAN_H323 here).
Set the Destination to the H.323 device's LAN IP address object (LAN_H323).
LAN_H323 is the destination because the ZyWALL applies NAT to traffic before
applying the firewall rule.
Set the Service to H.323.
Click OK.
Figure 105 Configuration > Firewall > Add
7.11 How to Allow Public Access to a Web Server
This is an example of making an HTTP (web) server in the DMZ zone accessible
from the Internet (the WAN zone). In this example you have public IP address
1.1.1.1 that you will use on the ge3 interface and map to the HTTP server's
private IP address of 192.168.3.7.
Figure 106 Public Server Example Network Topology
192.168.3.7
152
DMZ
1.1.1.1
ZyWALL USG 1000 User's Guide