Functions Used With F-Code Communications - Muratec MFX-2350 User Manual

Functions used with F-code communications

Utilizing sub-addresses and passwords enables you to use the following functions.
F-code security box communications
When the other party for communications has set an F-code security box, F-code security communications can
be performed by specifying the sub-address and the password (if necessary) for that box.
Unless the receiver of the security box communication enters a specifi c I.D. code, the received document cannot
be printed out, which is essential for transmitting highly confi dential documents.
Reference
· F-code security box transmissions ........................... Transmissions using sub-addresses (page 3-140)
· Receiving F-code security box communications ...... Printing stored documents (page 3-146)
F-code bulletin box communications
When the other party for communications has set an F-code bulletin box, documents can be transmitted to the
bulletin box. The stored documents in the bulletin box can be retrieved (polling) by specifying the sub-address
of that box. (Password specifi ed as necessary)
Reference
· Transmitting documents to other party's bulletin box .............. Transmissions using sub-addresses (page 3-140)
· Retrieving documents stored in other party's bulletin box ....... Receptions using sub-addresses (page 3-142)
· Storing documents in your bulletin box ..................................... Storing documents in bulletin boxes (page 3-144)
F-code relay command communications
When an F-code relay box has been set in a relay machine, specifying the sub-address of that box can perform
relay command communications. (Password specifi ed as necessary)
At the relay machine, specifi ed documents are transmitted (distributed) to the receiving party (distribution
destination) registered in the box.
Reference
· When transmitting relay commands: Perform F-code transmissions after fi rst checking the sub-address of and password
· When this machine is used as the relay machine: Set the relay box by registering F-code boxes (page 3-133).
to the relay command communications box that are set in the other fax machine.
(page 3-140)
F-Code Communications
●
FAX Chapter2 Advanced Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
3-123