Muratec MFX-2350 User Manual page 441

Function
Select from "Auto", which automatically selects the magnifi cation
Rx Reduc. Rate according to the length of the document being received, or "100%" to have
all faxes printed out at the same rate of reduction.
This sets at what point the document printout will extend to the following
Reduc. Margin
page if the document being received cannot fi t within the effective
(page 3-52)
recordable area.
This sets the print method for documents received. When 2 pages of a
document comparable to Half-letter
that the half-page reception is ON, they will be reduced at the appropriate
rate and printed out on 1 sheet of paper. When the paper in the same size
Paper Saving
as the received document is loaded, the half-page reception will be invalid.
If it is set to the duplex reception, both sides of paper will be printed on.
Note
To set the duplex reception, the duplex unit is necessary.
The Letter
size. The rotate transmission is only effective in case of memory transmissions.
Letter
Rotate Tx
If this is set to "ON", fax transmission for multiple documents will begin
Quick Memory Tx
in order of page when it has been scanned and stored.
Any part of a fax that was not transmitted correctly due to the line error
ECM Mode will automatically be resent.
(The receiving machine also requires the same function.)
Service Mode Do not set.
You can put a number registered in advance to the destination number
PreFix (page 3-66)
for dialing. This can be also used for entering the speed-dial.
If this is set to "ON", the received date (year, month, day) and time can be
printed with the word "Received" at the header of the received document.
Receive Time Stamp
Note
If the receiving print ratio is fi xed to 100% and the reduction margin setting
is small, the received document could be divided into 2 sheets by attaching the
Receive Time Stamp.
Description
are received consecutively in case
document can be rotated on its side, scanned and sent as Letter
Letter
Transmit
29 Sep 2006 02:16
29 Sep 2006 02:15
Underlined items are the factory default.
Other Settings
Setting option
Auto
100%
0.0 - 3.3": 1.7"
OFF
Duplex RX
H-Page RX
ON
OFF
ON
OFF
ON
OFF
OFF
ON
3-239
●
FAX Chapter5 Fax Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix