Protecting Department Management Settings - Muratec MFX-2350 User Manual

Protecting department management settings

You can set the department management protect function ON to disable to register or delete
department codes or change relevant settings. Register the protect passcode in advance. (page
5-34)
Managing Operation Conditions by Department
1
Press the <Setting> key.
2
Press [Management].
3
(1) Press [ ] or [ ].
(2) Press [Depart. Management].
4 Press [Protect].
5
Use the numeric keys to enter
the protect passcode.
6 (1) To protect the department
management, select [ON].
(2) Press [Enter].
Depart. Management Depart. Management
Select item to edit. Select item to edit.
Setting Setting Enter/Edit Enter/Edit Delete Delete
Counter Counter
Reset Reset
Depart. Management Depart. Management
Enter the Passcode and select [Enter]. Enter the Passcode and select [Enter].
Protect Passcode Protect Passcode
_ _
Clear Clear
Depart. Management Depart. Management
Select ON/OFF and select [Enter]. Select ON/OFF and select [Enter].
Protect Protect Cancel Cancel
OFF OFF ON ON
Department Code setting Department Code setting
can be prohibited. can be prohibited.
Function Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
Enter Enter
FAX
Protect Protect
OFF OFF
Chapter3
FAX
Chapter4
FAX
Chapter5
Enter Enter
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Enter Enter
Function
Settings
In This
Case...
Appendix
5-23