COPY
Chapter1
Automatic document size detection
● Both the ADF and the document glass can automatically detect 11"×17", Legal (14"×8.5"), Letter
(11"×8.5"), Letter
■
When the document size cannot be automatically detected
The following message is displayed when the document size detection sensor does not operate properly
because the scanner is operating, or the platen cover is open.
Copy Ready
Doc.Type
Auto
Contrast
Auto
Auto doc. size detection failed!
DuplexCopy
OFF
Copy continue? (Letter /100%)
Zoom
100%
Finishing
No Sort
Others
· Press [Yes] or the <Start> key to copy onto the selected paper.
Note
Depending on the paper, the image could run off the paper or there could be extra blank areas on the paper.
· Press [No] or the <Reset> key to cancel the operation and return to the standby screen.
Note
Restart the operation by selecting the paper to be used for copying or specifying the scan size.
2-2
●
COPY Chapter1
Before Copying
(8.5"×11"), Half-letter (8.5"×5.5"), Half-letter
Set
Memory
LTR
Yes
No
LTR
LGL
11x17
Basic Copy Features
001
100%
(5.5"×8.5") sized documents.