Muratec MFX-2350 User Manual page 539

Note Note
Press [No] to return to Press [No] to return to
step 3. step 3.
Note Note
· Up to 60 steps can be · Up to 60 steps can be
entered. entered.
· If you exceed 60 steps, · If you exceed 60 steps,
the following message the following message
is displayed: "Too many is displayed: "Too many
steps. Would you like to steps. Would you like to
enter?". enter?".
· Press [Yes] to enter · Press [Yes] to enter
the step, then proceed the step, then proceed
to step 7. Press [No] to to step 7. Press [No] to
return to the standby return to the standby
screen without entering screen without entering
the step. the step.
Note Note
· Press the <Reset> · Press the <Reset>
key to complete the key to complete the
operation and return to operation and return to
the standby screen. the standby screen.
· Press the <Interrupt> · Press the <Interrupt>
key to complete the key to complete the
entry and return to the entry and return to the
screen in step 7. screen in step 7.
3 Select the macro program key
you want to enter.
4
Press [Yes].
5
Perform the operation you want
to enter.
6 Press the <Macro Program> key
to complete the entry.
Macro program
Enter/Edit Enter/Edit
Select the number Select the number
that you want to enter/edit. that you want to enter/edit.
1:Not registered! 1:Not registered!
2:Not registered! 2:Not registered!
3:Not registered! 3:Not registered!
4:Not registered! 4:Not registered!
5:Not registered! 5:Not registered!
6:Not registered! 6:Not registered!
Enter/Edit Enter/Edit
Select the number Select the number
that you want to enter/edit. that you want to enter/edit.
1:Not registered! 1:Not registered!
1:Not registered! 1:Not registered!
Do you want to enter/edit? Do you want to enter/edit?
2:Not registered! 2:Not registered!
After registering the process, After registering the process,
select <Macro> to save. select <Macro> to save.
3:Not registered! 3:Not registered!
4:Not registered! 4:Not registered!
5:Not registered! 5:Not registered!
Yes Yes
6:Not registered! 6:Not registered!
Copy Ready Copy Ready
Memory Memory
Doc.Type Doc.Type
Auto Auto
Contrast Contrast
Auto Auto
DuplexCopy DuplexCopy
OFF OFF
LTR LTR
Zoom Zoom
100% 100%
LTR LTR
Finishing Finishing
LGL LGL
No Sort No Sort
11x17 11x17
Others Others
Function Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
Enter Enter
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
Enter Enter
FAX
Chapter3
FAX
No No
Chapter4
FAX
Chapter5
Set Set 001 001
100% 100%
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
5-3