Muratec MFX-2350 User Manual page 569

Function
■Complete Beep
Sound Settings
The machine can inform you that copy or fax operation is completed
by the beep.
●Copy Complete ....................When copying is completed
●List Print Complete ............When list printing is completed
●PC Printing Completed ......When document printing is completed
●Transmission Complete ......When fax transmission is completed
●Rx Complete ........................When fax reception is completed
●Rx Print Complete .............. When printing the received document
●IFAX Tx Complete .............. When transmission of Internet fax,
●Document Glass Scan End ... When scanning the document on the
●Sleep mode reception ........... When reception has fi nished during en-
Note
Press [Test] to sound the selected beep.
Sleep mode reception can be set when the energy save period is set.
(See "Energy Save Period" on page 5-34.)
■Paper Jam Alarm
You can set the alarm when a paper jam occurs.
Guidance The guidance mode and volume for the voice guidance can be set.
Energy Save You can make the settings for the low power mode or sleep mode in-
Mode cluding the time to switch to those modes, or the time to start or reset
the energy save mode.
Note
Regardless of this setting, if you press the <Energy Save> key, the low power
mode will start immediately. Or if you press the <Energy Save> key for
more than 3 seconds, the sleep mode will start.
"Low Power Mode" ............ If the machine is not used for the time set in
"Sleep Mode Setting" ........ When this is set to OFF, the machine will
"Sleep Mode" ..................... If the machine is not used for a selected
Note
Underlined items are the factory default.
Description
is completed
Scan to e-mail, Scan to folder or Scan
to FTP is completed
document glass is completed
ergy save mode
this item, it will automatically enter the low
power mode.
not enter the sleep mode.
amount of time in the Low Power Mode, it
automatically switches to sleep mode.
Device Management Settings
Setting option
OFF
Type 1
Type 2
Type 3
Voice
OFF
Type 1
Type 2
Type 3
Voice
OFF
Type 1
Type 2
Type 3
Voice
ON
OFF
Refer to "Voice Guidance"
(page 1-69)
●Low Power Mode:
001-100 : After 015 Minute
●Sleep Mode Setting
ON
OFF
●Sleep Mode
030-120 : After 060 Minute
Function Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
5-33