Muratec MFX-2350 User Manual page 571

Function
Security Rx Store the document received after security reception starting time in
the memory not to print.
This function makes it possible to store the document received at night
in the memory, for example, when no one is in the offi ce. The received
document can be printed later.
Jobs Waiting to The number of out-of-paper receptions and copies waiting to be printed
Print is displayed.
Print Mask The margin around the paper can be adjusted.
User Data Clear Caution: Delete all data that is entered in [Setting], including speed-dial,
Network Setting When the administrator password is set, enter it and press [Enter] to
go to the network setting screen.
■IP Address
● DHCP (Dynamic Host Confi guration Protocol) Setting...Set it to
ON when using the DHCP Server on the network. When you set it
to ON and reboot the MFP, an IP address is automatically assigned
to the MFP.
Note
Once the DHCP server has assigned the IP address to your MFP, that IP
address MUST be reserved within the specifi c DHCP scope. Failure to do so
could result in failed operation when the IP address lease expires.
●IP Address .................. Set the DHCP Server setting to OFF to allow
●Subnet Mask .............. Set the DHCP Server setting to OFF to allow
Note
To enable the settings of IP Address or Subnet Mask, set each setting to ON
and reboot the MFP.
●Gateway,Gateway2 ....You can set the Gateway or Gateway2.
●DNS Setting ...............You can set the DNS Setting.
■Show MAC Address
You can review the MAC address. (MAC Address entry is not
available)
■SMB Setting
You can set the following items.
●NetBIOS
●Work Group
●WINS1
●WINS2
Description
or copy/fax scan function settings.
you to set the IP Address.
you to set the Subnet Mask.
Device Management Settings
Setting option
Refer to "Security Recep-
tion" (page 3-92)
Refer to "Checking Copy
Print Queue" (page 2-27)
Refer to "Checking the
out-of-paper reception copy
print queue" (page 3-51)
0.04-0.16": 0.12"
ON
OFF
192.168.1.10
255.255.255.0
Not registered at
shipment.
Not registered at
shipment.
MAC Address is
displayed.
WORKGROUP
Function Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
5-35