Bypass Copy - Muratec MFX-2350 User Manual

Bypass copy

Bypass copy is available with the bypass tray.
Reference
For loading the paper in the bypass tray, refer to page 1-38.
Note Note
When loading the paper When loading the paper
that is larger than the that is larger than the
bypass tray, open the bypass tray, open the
extension tray. extension tray.
Note Note
Be sure to place the Be sure to place the
printing surface printing surface
downward. downward.
1 Load the document.
2
Open the bypass tray.
3 Align the guide plate to the
paper size. Place the printing
surface downward, and load the
paper by inserting its edge to the
end.
4
The bypass tray is automatically
selected when paper is loaded in
it.
5 Press the <Start> key.
Selecting the Paper and Copy
Extension tray Extension tray
Copy Ready Copy Ready
Doc.Type Doc.Type
Auto Auto
Contrast Contrast
Auto Auto
Paper has been set in bypass. Paper has been set in bypass.
DuplexCopy DuplexCopy
Set printed face down. Set printed face down.
OFF OFF
LTR LTR
Zoom Zoom
100% 100%
LTR LTR
Finishing Finishing
LGL LGL
No Sort No Sort
11x17 11x17
Others Others
●
COPY Chapter1 Basic Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Bypass tray Bypass tray
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
Guide plate Guide plate
SCAN
Chapter3
Set Set 001 001
Memory Memory 99% 99%
Function
Settings
In This
Case...
Appendix
2-15