Primarily Using The Phone (Tel Ready Mode) - Muratec MFX-2350 User Manual

FAX
Chapter1
Primarily using the phone ( Tel ready mode)
You can start the reception after picking up the handset and checking the other party.
Operating tips
●The optional handset is required. (page 1-16)
●Set the reception mode to the "Tel ready mode" in the user install setting. (page 1-60)
● If there is a document in the ADF, the transmission will start by pressing the <Start> key. Make sure
there are no documents in the ADF.
Note Note
If it is a phone call, If it is a phone call,
you can start the you can start the
conversation. conversation.
Note Note
If it is a fax reception, you If it is a fax reception, you
will hear the beep or no will hear the beep or no
sound. sound.
Note Note
· Check the request of the · Check the request of the
other party, and press other party, and press
the <Start> key to put the <Start> key to put
down the handset. down the handset.
· When the other party is · When the other party is
manually transmitting, manually transmitting,
there might be no sound there might be no sound
when the handset is when the handset is
picked up, so confi rm on picked up, so confi rm on
the phone if no one is on the phone if no one is on
the line before pressing the line before pressing
the <Start> key. the <Start> key.
· When you hear the beep, · When you hear the beep,
it is a fax call coming it is a fax call coming
in. When you answer in. When you answer
the call using the the call using the
handset in the machine, handset in the machine,
press the <Start> key press the <Start> key
immediately. immediately.
· When you answer the · When you answer the
call using the additional call using the additional
phone, press the <Start> phone, press the <Start>
key on the main unit to key on the main unit to
start the reception. (Put start the reception. (Put
down the handset after down the handset after
reception.) reception.)
3-48
●
FAX Chapter1 Basic Fax Features
1
Pick up the handset when the
machine rings.
2 Talk to the other party.
3 Press the <Start> key.